Rosco’s new VividFX paints have been designed specifically to meet the demanding needs of the special effects artist. The brilliant pigments used create stunning blacklight effects and intermix cleanly to provide a wide array of intermediate fluorescent hues.
Use VividFX wherever eye-catching dramatic special effects painting is desired:
BINDER TYPE: Vinyl Acrylic
DILUTION: VividFX should be used straight out of the can. It can be diluted with water if necessary, however, this may reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin uniform coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Gallon, Quart and Pint Cans.