FINISH: Matte.
SOLVENT: Water.
BINDER TYPE: Vinyl Acrylic.
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Pints, Quarts
Fluorescent Colour Chips | ||
| 5779: White | |
| 5780: Red | |
| 5781: Orange | |
| 5782: Yellow | |
| 5783: Green | |
| 5784: Blue | |
| 5785: Invisible blue | |
| 5786: Pink | |
| 5787: Gold |
Reviews
There are no reviews yet.