FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Ultratec LSX MK II Low Smoke Converter
Kryolan Orange Stipple Sponge
RoscoFlamex PA Paint Additive
Acid Yellow 73 Fluorescein
Custom Made Slime
Igeba Thermal Water Based Fog Generator
Hurricane 5000 (110V) DMX
Eagle One Original Nevr-Dull Magic Wadding Polish
Kryolan Tear Stick
Kryolan Rubber Mask Grease Palette - Pro
2" Double Sided Masking Tape
Little Blizzard Sound Proof Snow Machine
Scorpion Flashlight Head Assembly
Look Solutions Radio Remote XLR
Static Kernmantle Rope
1" Foam Brush
ZÜCA Stylist Case - Small
Duracell Procell PC1400 'C' Alkaline Battery
Ben Nye Concealer Palette 12 Colours
Duracell 1/3N Lithium Coin Photo Battery
Kryolan Menthol Tear Blower Refill
Streamlight 51101 Xenon Bulb
Krylon Dulling Spray 




Reviews
There are no reviews yet.