FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Lintless Swabs 1 1/2" x 6" - 30/pk
Kryolan Tear Stick
Pelican 1650 Large Case
Ben Nye Creature MagiCake Aqua Palette (CFK-14)
CITC HazeMax Water Vapour Haze Machine
Variable-Angle Pod
Kryolan Supracolor Cream Palette
Smoke Tube (Smoke Special Effects)
Tubular Webbing
Disposable Tapered Head Mascara Wands (25 Pack)
ZÜCA Artist Shoulder Bag
Picquic Sixpac Plus Screwdriver
Jumbo Hurricane Blower
Ben Nye Concealer Palette 12 Colours
Pelican M11 Rechargeable Flashlight
Dynamic's Super Lid with Spout
3/4" Friction Tape
Kryolan Orange Stipple Sponge
ShotMax Confetti Machine
3M Hi-Strength 90 Spray Adhesive (500g)
Duracell Procell PC1604 Alkaline Battery
Blasting Galvanometer
Ben Nye Clown White Lite
Cryo-Jet Hose 50'
Procore Professional Measuring Tape - 3/8" x 100'
Krylon Dulling Spray 




Reviews
There are no reviews yet.