FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Tear Stick
Kryolan Glatzan Bald Cap
Kryolan Supracolor Cream Palette
Kryolan Bald Cap Mold Block (Read Head)
Kryolan Menthol Tear Blower Refill
Disposable Tapered Head Mascara Wands (25 Pack)
Ultra Wet Spray
3/4" Friction Tape
Pelican 1500 Medium Case
Lens Pen Cleaning Kit
Dynamic's Super Lid with Spout
Kryolan Orange Stipple Sponge
Le Torcia Butane Canister 2oz
Mole Richardson Maroon Enamel Spray
BreakAway Champagne Bottles
33" Safety Cable
Mehron Matte Spirit Gum
Ben Nye Concealer Palette 12 Colours
Radio Chest Harness
Le Maitre G300 Smoke & Haze Machine
ZÜCA Artist Shoulder Bag
Duracell Procell PC1300 'D' Alkaline Battery
Kryolan Lip Rouge Palette - Classic 2
Le Maitre Standard Smoke Fluid
Clamps for Hackles
Battery Replacement for Power Tiny Fogger
Kryolan Rubber Mask Grease Palette - Pro
Tubular Webbing
1" Foam Brush 




Reviews
There are no reviews yet.