FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Rosco Light Fog Fluid
Kryolan Rubber Mask Grease Palette - Pro
Kryolan Glatzan Bald Cap
Rosco Flat Acrylic Glaze
Pelican 1500 Medium Case
Ben Nye Fireworks Wheel
Kryolan Cold Foam Set
Kryolan Lip Rouge Palette - Classic 2
Filmcraft Deluxe Script Pouch
Kryolan Orange Stipple Sponge
Ultratec EZ Kleen Preventative Maintenance Fluid
Golf Tees
Industrial Hard Styling Chavant Clay CM 50
Lintless Swabs 1 1/2" x 6" - 30/pk
Kryolan Blood Capsules TF
Custom Made Slime
ENH-5 MR16 Halogen Light Bulb
RoscoFlamex PA Paint Additive
Mehron Matte Spirit Gum
3M Super 77 Spray Adhesive (399g)
Hurricane 5000 (110V) DMX
Alumilite Super Casting Kit
Roscopak Silver/Gold Reflector
Laser Pointer On/Off Switch & Case
BreakAway Beaker No Rub On
Pelican TSA Lock
Rosco FlexBond Adhesive
Le Maitre G300 Smoke & Haze Machine
LED Stage Marker (Red/Green)
Pelican Desiccant Silica Gel
Vermiculite
Kryolan Supracolor Cream Palette
1" Foam Brush 



Reviews
There are no reviews yet.