FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Disposable Tapered Head Mascara Wands (25 Pack)
Ultratec Show Fogger Pro
Duracel 'AAAA' Alkaline Batteries
LED Stage Marker (Red/Green)
Mehron Castor Sealer
Osram EHJ 64655 HLX Halogen Bulb
Vermiculite
Kryolan Supracolor Cream Palette
Roscopak Silver/Gold Reflector
CITC Infinityâ„¢ Fluid Supplier w/High Pressure Pump
Laser Pointer On/Off Switch & Case
3" Gorilla Heavy Duty Packing Tape
Kryolan Blood Capsules TF
A&B Smoke
Caframo Tiny Tornado II
Can Holder Pouch
Steelie Universal Adhesive Replacement Kit
Rosco Lens Tissue
Pelican 1650 Large Case
RoscoFlamex PA Paint Additive 



Reviews
There are no reviews yet.