FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Ultratec EZ Kleen Preventative Maintenance Fluid
Duracell Procell PC1300 'D' Alkaline Battery
Duracell Procell PC1400 'C' Alkaline Battery
Pelican TSA Lock
Le Torcia Butane Canister 2oz
Kryolan Glatzan Bald Cap
Igeba Thermal Fog Generator (TF-35)
Kryolan Supracolor Cream Palette
Ben Nye Fireworks Wheel
Kryolan Rubber Mask Grease Palette - Pro
Kryolan Blood Capsules TF
Bran (Sand Special Effects)
Reusable Rubber Twist Ties (Gear Ties)
3M Super 77 Spray Adhesive (399g)
RoscoFlamex PA Paint Additive 



Reviews
There are no reviews yet.