FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Can Holder Pouch
QE16 Blender Brush
Ultratec LSX MK II Low Smoke Converter
3M Hi-Strength 90 Spray Adhesive (500g)
Pelican 1620 Large Case
Kryolan Bald Cap Mold Block (Read Head)
2" Double Sided Masking Tape
Duracell Procell PC1604 Alkaline Battery
Plain Chipboard Sheets
Ultratec Party Fog Fluid
Mole Richardson Maroon Enamel Spray 


Reviews
There are no reviews yet.