FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Rubber Mask Grease Palette - Pro
Variable-Angle Pod
Ben Nye Fireworks Wheel
Scorpion Flashlight Head Assembly
Mehron Castor Sealer
Kryolan Orange Stipple Sponge
Hurricane 5000 (110V) DMX
Snow Sheet
Sesamee SearchAlert TSA Lock
Kryolan Cold Foam Set
Duracell Procell PC1604 Alkaline Battery
Kryolan Lip Rouge Palette - Classic 2
Alumilite Super Casting Kit
Procore Professional Measuring Tape - 3/8" x 100'
Camp Heat
Pyroflash 6/24 Controller
Rosco Flat Acrylic Glaze
Rain-X® Original Glass Water Repellent
3/8" Disposable Acid Brush
Mole Richardson Maroon Enamel Spray 


Reviews
There are no reviews yet.