FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Duracell Procell PC1400 'C' Alkaline Battery
60" Digital Green Diver Stretch Fabric
Firebox Standard System (Streamlight) 45311
Kryolan Cold Foam Set
Exposed Film Cloth Tape
Kryolan Rubber Mask Grease Palette - Pro
CRL Professional Glass Cleaner
Duracell Procell PC1604 Alkaline Battery
HP Stinger Bulb
Streamlight Fire Vulcan Vehicle Mount System
Pen-Style Chalk Holder
Laser Pointer On/Off Switch & Case
0/6 Campbell Studio Rigging Chain
3-1 Multi Purpose Light Oil
Durable Electrical Pouch
Camp Heat
Gorilla Spray Adhesive Heavy Duty 14 oz
Master Shielded Padlock
LED Stage Marker (Red/Green)
Flame Gel
Krylon High Heat Paint 




Reviews
There are no reviews yet.