FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Tear Stick
Look Solutions Radio Remote XLR
RoscoFlamex PA Paint Additive
Kryolan Supracolor Cream Palette
Putora Sharpness Indicator Field Chart (7A9)
Clamps for Hackles
ShotMax Confetti Machine
Pelican M11 Rechargeable Flashlight
Lintless Swabs 1 1/2" x 6" - 30/pk
Duracell Procell PC1604 Alkaline Battery
Shoe Goo - Shoe Repair Adhesive
Disposable Tapered Head Mascara Wands (25 Pack)
Handle Boot Bag (Clear) - 20" x 20" x 5" (10 bags/roll)
Tubular Webbing
Mehron Matte Spirit Gum
Energizer CR2450 Lithium Coin Battery
3/4" Friction Tape
Krylon Dulling Spray
Rosco Flat Acrylic Glaze
33" Safety Cable
Kryolan Lip Rouge Palette - Classic 2
FBI GH Earpiece Headset (Ear Hook Earpiece)
Krylon Rust Tough Hamm-R Finishes Spray 



Reviews
There are no reviews yet.