FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Pelican Desiccant Silica Gel
Cheesecloth 100% Cotton
3/4" Friction Tape
Z-7 Debonder Adhesive Remover
Duracell Procell PC1400 'C' Alkaline Battery
Lintless Swabs 1 1/2" x 6" - 30/pk
3M Hi-Strength 90 Spray Adhesive (500g)
Duracell Procell PC1604 Alkaline Battery
2" Double Sided Masking Tape
Kryolan Menthol Tear Blower Refill
Alumilite Mini Casting Kit
HollyNorth AC Pouch Large
Rosco CrystalGel 




Reviews
There are no reviews yet.