FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Laser Pointer On/Off Switch & Case
FBI Deluxe Earpiece Headset
Krylon High Heat Paint
Webbing with HD Ratchet
Duracell Procell PC1604 Alkaline Battery
Insert Camera Slate
3M Super 77 Spray Adhesive (399g)
Tubular Webbing
Energizer CR2450 Lithium Coin Battery
Rosco Lens Tissue
MegaPro Original Screwdriver
LED Stage Marker (Red/Green)
3/4" Friction Tape
Mole Richardson Maroon Enamel Spray
Kryolan Lip Rouge Palette - Classic 2
Antari B-100X Bubble Machine
Kryolan Supracolor Cream Palette
Pelican 1620 Large Case
Kryolan Tear Stick
Roscopak Silver/Gold Reflector
Picquic Sixpac Plus Screwdriver
Bee Gum (Smoke Effects)
GP 23A Electronic Alkaline Batteries
Mehron Matte Spirit Gum
Duvetyne/Commando Fabric 9oz – Black (FR)
Pelican 1650 Large Case
Rosco FlexBond Adhesive
Ben Nye Mini Splatter Blood Brush
Hurricane 5000 (110V) DMX
3/8" Disposable Acid Brush 



Reviews
There are no reviews yet.