GypSnow
$145.00
Gypsnow is a powdered gypsum plaster. It is used in the film industry to build objects that will be smashed or demolished on camera. All objects or props made from Gypsnow are lightweight and fragile, so they are safe to use on set.
- used for special effects props requiring physical impact
- lightweight and safe
- easily breakable
50lb/bag
Mixing
Due to the expansion of Gypsnow, the maximum recommended mix for any pour is 5 gallons.
Add 1.4 gallons (5.4 L) of water into a 5 gallon clean pail. For better results, water temperature should be 70°F.
Add 14 1/4 Lbs (6.5 kg) of Gypsnow into the pail containing the water.
Stir with an electrical drill for 8 seconds at 1/2 to 2/3 power
Pour the mixture rapidly into a plastic lined form at approximately at 2/3 from the top of the plastic form.
Remove solid mixture from the form/mold after 1 hour.
Contact Western Blended Products for information regarding Gypsnow variations. Do not add any other additives without contacting Western Blended Products for approval.
Drying
Gypsnow must stay in the mold for 45 minutes to an hour before the product may be removed. Carving and painting may take place when the product is removed from the mold and has properly dried.
Storage
Gypsnow shall be kept indoors or if stored outdoors, shall be adequately covered to keep dry and be stored off the ground.
Only logged in customers who have purchased this product may leave a review.
Related products
Mono
Pyro
Reviews
There are no reviews yet.