FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Kryolan Rubber Mask Grease Palette - Pro
MegaPro Original Screwdriver
Kryolan Supracolor Cream Palette
CITC Extreme Bubble Fluid
Webbing with HD Ratchet
Kryolan Menthol Tear Blower Refill
Tubular Webbing
Ben Nye Fireworks Wheel
Duracell Procell PC1400 'C' Alkaline Battery
Duracell Procell PC1604 Alkaline Battery
Pelican M11 Rechargeable Flashlight
Disposable Tapered Head Mascara Wands (25 Pack)
Sheik Non-Lubricated Condoms - For Special Effects
Steelie Universal Adhesive Replacement Kit
Ultratec Silent Storm Snow Machine DMX
ADJ Mirror Ball Motor M103
Mehron Matte Spirit Gum
Steelie Orbiter Dash Mount Kit
Kryolan Orange Stipple Sponge
2" Double Sided Masking Tape
Rosco FlexBond Adhesive
Kryolan Cold Foam Set
Krylon Chalkboard Paint 



Reviews
There are no reviews yet.