FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Kryolan Glatzan Bald Cap
Kryolan Supracolor Cream Palette
Disposable Tapered Head Mascara Wands (25 Pack)
Kryolan Bald Cap Mold Block (Read Head)
CITC Foam Dome
FogBlocker Anti-Fog Cloth
Mehron Matte Spirit Gum
Kryolan Orange Stipple Sponge
Caframo Tiny Tornado II
2" Double Sided Masking Tape
Ben Nye Fireworks Wheel
Dynamic's Super Lid with Spout
Look Solutions Radio Remote XLR
3M Super 77 Spray Adhesive (399g)
Ultratec LSX MK II Low Smoke Converter
Variable-Angle Pod
Ultratec Show Fogger Pro
Duracell DL1216 Lithium Battery
Z-7 Debonder Adhesive Remover
RoscoFlamex PA Paint Additive 




Reviews
There are no reviews yet.