FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Breakaway Sugar Container
Disposable Tapered Head Mascara Wands (25 Pack)
Rosco FlexBond Adhesive
CITC HazeMax Water Vapour Haze Machine
Ben Nye Concealer Palette 12 Colours
3M Super 77 Spray Adhesive (399g)
Streamlight Fire Vulcan Vehicle Mount System
Draw Cord Shoe Bags (Clear) – 16" x 18" x 4" (10 bags/roll)
Le Maitre G300 Smoke & Haze Machine
Ben Nye Fireworks Wheel
Kryolan Bald Cap Mold Block (Read Head)
Kryolan Tear Stick
3/8" Disposable Acid Brush
3M Hi-Strength 90 Spray Adhesive (500g)
Pelican 1500 Medium Case
Acrylic Ice Cubes
2" Double Sided Masking Tape
Camp Heat
Smoke Tube (Smoke Special Effects)
Gorilla Epoxy Putty Stick
Rosco Flat Acrylic Glaze 



Reviews
There are no reviews yet.