FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Krylon Rust Tough Hamm-R Finishes Spray
Variable-Angle Pod
Rosco Lens Tissue
Disposable Tapered Head Mascara Wands (25 Pack)
Lintless Swabs 1 1/2" x 6" - 30/pk
Pelican M11 Rechargeable Flashlight
Insert Camera Slate
Pelican 1500 Medium Case
Kryolan Rubber Mask Grease Palette - Pro
Camp Heat
Mehron Castor Sealer
Ultratec EZ Kleen Preventative Maintenance Fluid
Kryolan Menthol Tear Blower Refill
Ultratec Power Fog Industrial 9D - Fog Machine
Putora Sharpness Indicator Field Chart (7A9)
3/4" Friction Tape
Krylon Chalkboard Paint
Kryolan Bald Cap Mold Block (Read Head)
Silica Gel 5g (50 pcs)
Duracell Procell PC1400 'C' Alkaline Battery
Sesamee SearchAlert TSA Lock
3M Hi-Strength 90 Spray Adhesive (500g)
Rosco FlexBond Adhesive
Pelican 1650 Large Case
Krylon High Heat Paint 




Reviews
There are no reviews yet.