FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Kryolan Menthol Tear Blower Refill
Clamps for Hackles
Duracell Procell PC1400 'C' Alkaline Battery
Lintless Swabs 1 1/2" x 6" - 30/pk
CITC Infinityâ„¢ Fluid Supplier w/High Pressure Pump
Kryolan Glatzan Bald Cap
Insert Camera Slate
Blasting Galvanometer
Alumilite Flex 80 Rubber Casting Kit
BreakAway Beaker No Rub On
Ben Nye Fireworks Wheel
Cardellini Laser Pointer Holder
Pyroflash 6/24 Controller
Duracell Procell PC1604 Alkaline Battery
Disposable Tapered Head Mascara Wands (25 Pack)
Rubber Glass Pieces
1" Foam Brush 


Reviews
There are no reviews yet.