FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Antari B-100X Bubble Machine
Kryolan Bald Cap Mold Block (Read Head)
Tubular Webbing
3M Hi-Strength 90 Spray Adhesive (500g)
Vermiculite
Master Padlock
Ultratec LSX MK II Low Smoke Converter
Rosco Lens Tissue
Kryolan Supracolor Cream Palette
Energizer CR2025 Lithium Coin Battery
Blasting Galvanometer
RoscoFlamex PA Paint Additive
Static Kernmantle Rope
CITC Director Fan
Rosco FlexBond Adhesive
Camp Heat
Bamboo Clothes Pins
Roscopak Silver/Gold Reflector
Rosco Flat Acrylic Glaze
1" Foam Brush 


Reviews
There are no reviews yet.