FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Look Solutions Radio Remote XLR
Z-7 Debonder Adhesive Remover
Ben Nye Clown White Lite
Firebox Standard System (Streamlight) 45311
Rosco FlexBond Adhesive
CITC High Performance II Haze Fluid
Ben Nye Fireworks Wheel
Battery Replacement for Power Tiny Fogger
Pelican 1620 Large Case
Mehron Matte Spirit Gum
Ultratec LSX MK II Low Smoke Converter
Master Padlock
3M Super 77 Spray Adhesive (399g)
Kryolan Supracolor Cream Palette
2" Double Sided Masking Tape
Sculpey Polymeric Clay
Krylon Rust Tough Hamm-R Finishes Spray 




Reviews
There are no reviews yet.