DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
3/4" Friction Tape
Sculpey Polymeric Clay
3M Hi-Strength 90 Spray Adhesive (500g)
Mehron Matte Spirit Gum
Ultratec Party Fog Fluid
Little Blizzard Quiet Cube™ Snow Machine
Kryolan Tear Stick
Mehron Castor Sealer
Antari Z Fuel Fog Fluid (UVG)
QE20 Precision Shadow Brush
Draw Cord Shoe Bags (Clear) – 16" x 18" x 4" (10 bags/roll)
Kryolan Menthol Tear Blower Refill
CITC Little Blizzard Dry 100 Snow Fluid
Duracell Procell PC1300 'D' Alkaline Battery
QL23 Lip Brush
Golf Tees
Kryolan Rubber Mask Grease Palette - Pro
LED Stage Marker (Red/Green)
Look Solutions Radio Remote XLR
Ben Nye Concealer Palette 12 Colours
CITC SnoBox™ Weather Resistant Snow Machine
Smoke Tube (Smoke Special Effects)
1" x 16' 3M 8935 Sew-On Reflective Safety Fabric - Silver (Flame Resistant)
Ultratec Silent Storm Snow Machine DMX
Kryolan Blood Capsules TF
Streamlight Fire Vulcan Vehicle Mount System
Kryolan Cold Foam Set
Duracell 76A Alkaline Battery
Cryo-Jet Assembly
MESH Script Bag 










Reviews
There are no reviews yet.