DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
Kryolan Tear Stick
QE10 Crease Blender Brush
Disposable Tapered Head Mascara Wands (25 Pack)
CITC HazeMax Water Vapour Haze Machine
Smoke Tube (Smoke Special Effects)
Tubular Webbing
Precision Brand ABC Blackener Kit
ADJ Flash Shot DMX - LED Strobe Light
Macbeth Colour Checker Chart
Ultratec Mini/Opti Mist Canister
Antari Z Fuel Fog Fluid (UVG)
Kryolan Blood Capsules TF
Kryolan Lip Rouge Palette - Classic 2
Ben Nye Highlighter Pencil
Duracell Procell PC1300 'D' Alkaline Battery
Rosco Stage & Studio Fog Fluid
Lintless Swabs 1 1/2" x 6" - 30/pk
Kryolan Orange Stipple Sponge
Look Solutions Radio Remote XLR
Draw Cord Boot Bags (Clear) - 20" x 24" x 4" (10 bags/roll)
3M Super 77 Spray Adhesive (399g)
Safety Tape Non-Skid Slip-Resistant Tread
Custom Made Slime
QF22 Fan Brush Synthetic
1″ x 15′ High Intensity Reflective Tape Fl Orange
Bikini Bite - Roll On Adhesive
Igeba Thermal Water Based Fog Generator
Rosco FlexBond Adhesive 








Reviews
There are no reviews yet.