DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
Ben Nye Fireworks Wheel
RoscoFlamex PA Paint Additive
Hurricane 5000 (110V) DMX
Telesis Beta Bond
Streamlight 51104 Xenon Bulb
Kryolan Glatzan Bald Cap
Mehron Castor Sealer
Smoke Tube (Smoke Special Effects)
Lintless Swabs 1 1/2" x 6" - 30/pk
Firebox Standard System (Streamlight) 45311
Draw Cord Boot Bags (Clear) - 20" x 24" x 4" (10 bags/roll)
Rosco FlexBond Adhesive 








Reviews
There are no reviews yet.