DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
Master Shielded Padlock
3M Hi-Strength 90 Spray Adhesive (500g)
Z-7 Debonder Adhesive Remover
CITC Director Fan
Mehron Matte Spirit Gum
SoleMates Blister Blocker Balm
Kryolan Supracolor Cream Palette
Disposable Tapered Head Mascara Wands (25 Pack)
4" Black Crepe/Masking Paper Tape
Kryolan Cold Foam Set
FBI HD Deluxe Earpiece Headset
Duracell Procell PC1604 Alkaline Battery
Kryolan Menthol Tear Blower Refill
Mehron Castor Sealer
0/6 Campbell Studio Rigging Chain
HiDef Matting Spray
Kryolan Tear Stick
Insert Camera Slate
Firebox Standard System (Streamlight) 45311
Duracell AA MN1500 Copper Top Alkaline Battery
Can Holder Pouch
LED Stage Marker (Red/Green)
Scorpion Flashlight Head Assembly
LiteBox Bulb - Streamlight
Pelican 1620 Large Case
Rosco FlexBond Adhesive 










Reviews
There are no reviews yet.