FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Bald Cap Mold Block (Read Head)
Laser Pointer On/Off Switch & Case
DSC Labs Billups VF/X Chart
HiDef Matting Spray
Duracell Procell PC1604 Alkaline Battery
ShotMax Confetti Machine
LED Stage Marker (Red/Green)
Disposable Tapered Head Mascara Wands (25 Pack)
Pelican TSA Lock
3/4" Friction Tape
Kryolan Lip Rouge Palette - Classic 2
Kryolan Cold Foam Set
Mehron Castor Sealer
Cheesecloth 100% Cotton
Mehron Matte Spirit Gum
0/6 Campbell Studio Rigging Chain
Streamlight 51105 Xenon Bulb
Ultratec Silent Storm Snow Machine DMX
Lintless Swabs 1 1/2" x 6" - 30/pk
FBI Deluxe Earpiece Headset
Alumilite Super Casting Kit
Kryolan Blood Capsules TF
2" Double Sided Masking Tape
Devcon 5-Minute Epoxy
Sesamee SearchAlert TSA Lock
Ultratec LSX MK II Low Smoke Converter
Kryolan Tear Stick
Igeba Thermal Water Based Fog Generator
Krylon Dulling Spray 



Reviews
There are no reviews yet.