FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Tear Stick
CITC Director Junior Fan
Energizer 357/303 Silver Oxide Button Battery
Laser Pointer On/Off Switch & Case
Duracell 245 Lithium Battery
3M Super 77 Spray Adhesive (399g)
Alcolin Sticky Putty
Disposable Tapered Head Mascara Wands (25 Pack)
Dynamic's Super Lid with Spout
CITC HazeMax Water Vapour Haze Machine
CITC 2" x 24" Air Cannon Confetti Launcher
Look Solutions Radio Remote XLR
Lintless Swabs 1 1/2" x 6" - 30/pk
Master Shielded Padlock
Z-7 Debonder Adhesive Remover
Pancro Professional Lens Cleaner Spray
Hurricane 5000 (110V) DMX
Cheesecloth 100% Cotton
Le Maitre G300 Smoke & Haze Machine
3M Hi-Strength 90 Spray Adhesive (500g)
Duracell Procell PC1604 Alkaline Battery
Rosco FlexBond Adhesive
Casting The Female Torso Video
Pelican 1650 Large Case
Igeba Thermal Fog Generator (TF-35)
Pelican 1506 TSA Lock
Kryolan Orange Stipple Sponge
1" Foam Brush 



Reviews
There are no reviews yet.