FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
2″ x 16′ High Gloss Vinyl Trim Sew-On – Bright Pink
Roscopak Silver/Gold Reflector
Kryolan Tear Stick
Radio Chest Harness
Ultratec Radiance Touring System
PDQ Scentless Disinfectant Cleaner & Deodorant
Cheesecloth 100% Cotton
CITC Little Blizzard UV Blue Snow Fluid
Filmcraft Deluxe Script Pouch
Ben Nye Concealer Palette 12 Colours
Kryolan Glatzan Bald Cap
Rosco B Size Gobo
Igeba Thermal Fog Generator (TF-35)
Kryolan Cold Foam Set
Clamps for Hackles
Mehron Castor Sealer
CITC Foam Dome
Lintless Swabs 1 1/2" x 6" - 30/pk
Rosco Lens Tissue
Ultratec LSX MK II Low Smoke Converter
Camp Heat
Custom Made Slime
Streamlight 78914 Halogen Bulb
Ben Nye Fireworks Wheel
Macbeth Colour Checker Chart
Kryolan Bald Cap Mold Block (Read Head)
2″ 3M 8787 Heat Transfer (Iron On) Reflective Tape – Fl Yellow
Ultratec Silent Storm Snow Machine DMX
Look Solutions Radio Remote XLR
RoscoFlamex PA Paint Additive 


Reviews
There are no reviews yet.