FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Supracolor Cream Palette
1" x 16' 3M 8935 Sew-On Reflective Safety Fabric - Silver (Flame Resistant)
Ultratec LSX MK II Low Smoke Converter
Rosco Flat Acrylic Glaze
CITC 2" x 24" Air Cannon Confetti Launcher
Plain Chipboard Sheets
Lens Pen Cleaning Kit
ShotMax Confetti Machine
Rosco FlexBond Adhesive
Chauvet DJ Bubble King Machine
Draw Cord Shoe Bags (Clear) – 16" x 18" x 4" (10 bags/roll)
Sculpey Polymeric Clay
3/4" Friction Tape
Streamlight 51105 Xenon Bulb
Kryolan Glatzan Bald Cap
RoscoFlamex PA Paint Additive 


Reviews
There are no reviews yet.