FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Lip Rouge Palette - Classic 2
DSC Labs Billups VF/X Chart
Mehron Matte Spirit Gum
Disposable Tapered Head Mascara Wands (25 Pack)
Kryolan Cold Foam Set
Scorpion Flashlight Head Assembly
Antari Z Fuel Fog Fluid (UVG)
Radio Chest Harness
Alumilite Super Casting Kit
Kryolan Tear Stick
Lintless Swabs 1 1/2" x 6" - 30/pk
Flame Gel
Kryolan Orange Stipple Sponge
Hurricane 5000 (110V) DMX
Faulkner Folding Director's Chair w Side Tray & Pouch
Kryolan Glatzan Bald Cap
Acrylic Ice Cubes
Duracell Procell PC1604 Alkaline Battery
Ultratec Radiance Touring System
Ultratec Mini/Opti Mist Canister
Rosco Flat Acrylic Glaze 





Reviews
There are no reviews yet.