FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
2" Double Sided Masking Tape
Cheesecloth 100% Cotton
Roscopak Silver/Gold Reflector
Le Maitre G300 Smoke & Haze Machine
Firebox Standard System (Streamlight) 45311
Kryolan Tear Stick
3/4" Friction Tape
Duracell Procell PC1400 'C' Alkaline Battery
Mehron Castor Sealer
CITC 2" x 24" Air Cannon Confetti Launcher
A&B Smoke
Master Padlock
Pelican 1500 Medium Case
Industrial Hard Styling Chavant Clay CM 50
Mole Richardson Maroon Enamel Spray
Casting The Female Torso Video
Streamlight 51105 Xenon Bulb
Webbing with HD Ratchet
Streamlight Fire Vulcan Vehicle Mount System
Kryolan Lip Rouge Palette - Classic 2
Ben Nye Fireworks Wheel
Kryolan Glatzan Bald Cap
ShotMax Confetti Machine
33" Safety Cable
Tubular Webbing
Microfibre Cleaning Cloths - 3/pk
LED Stage Marker (Red/Green)
Rosco Flat Acrylic Glaze 




Reviews
There are no reviews yet.