FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Ultratec LSX MK II Low Smoke Converter
CITC Director Junior Fan
Steelie Bar Mount Component
Bull Wipes All Purpose Disinfectant
3M Super 77 Spray Adhesive (399g)
Kryolan Blood Capsules TF
Master Padlock
GypSnow
3M Hi-Strength 90 Spray Adhesive (500g)
Kryolan Menthol Tear Blower Refill
BBA Incandescent Photoflood Bulb
Dynamic's Super Lid with Spout
Mehron Castor Sealer
Z-7 Debonder Adhesive Remover
Krylon Dulling Spray
Laser Pointer On/Off Switch & Case
FKW CP81 Halogen Projection Lamp
Rosco Flat Acrylic Glaze
Mehron Matte Spirit Gum
Ben Nye Mini Splatter Blood Brush
Duracell Procell PC1400 'C' Alkaline Battery
Bikini Bite - Roll On Adhesive
Lock-Ease® Graphited Lock Fluid 



Reviews
There are no reviews yet.