FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Ben Nye Fireworks Wheel
Rosco Lens Tissue
Webbing with HD Ratchet
RoscoFlamex PA Paint Additive
Kryolan Glatzan Bald Cap
Mini Flocking Applicator
3M Hi-Strength 90 Spray Adhesive (500g)
Mehron Matte Spirit Gum
Antari B-100X Bubble Machine
33" Safety Cable
Cryo-Jet Hose 50'
Z-7 Debonder Adhesive Remover
Touchless Sanitizer Dispenser
Duracel 'AAAA' Alkaline Batteries
Safety Tape Non-Skid Slip-Resistant Tread
Variable-Angle Pod
Jumbo Hurricane Blower
Static Kernmantle Rope
Pelican 1300 Case
Swivel Table Kit - Deluxe Bamboo Director Chair
Ultratec Power Fog Industrial 9D - Fog Machine
Lintless Swabs 1 1/2" x 6" - 30/pk
Macbeth Colour Checker Chart
DSC Labs Billups VF/X Chart
Furnie Pads
Caframo Tiny Tornado II
Duracell Procell PC1400 'C' Alkaline Battery
Krylon High Heat Paint 



Reviews
There are no reviews yet.