FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Olfa Blades
Kryolan Blood Capsules TF
Kryolan Menthol Tear Blower Refill
Z-7 Debonder Adhesive Remover
33" Safety Cable
Kryolan Rubber Mask Grease Palette - Pro
Igeba Thermal Water Based Fog Generator
Laser Pointer On/Off Switch & Case
Mehron Castor Sealer
Roscopak Silver/Gold Reflector
Pelican M11 Rechargeable Flashlight
LED Stage Marker (Red/Green)
3/4" Friction Tape
Ben Nye Concealer Palette 12 Colours
Look Solutions Viper NT Fog Machine
Ultratec EZ Kleen Preventative Maintenance Fluid
Kryolan Glatzan Bald Cap
Snow Blanket Roll
Krylon High Heat Paint 



Reviews
There are no reviews yet.