FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
60" Digital Green Diver Stretch Fabric
ZÜCA Artist Shoulder Bag
Cheesecloth 100% Cotton
MegaPro Original Screwdriver
Can Holder Pouch
Streamlight 51105 Xenon Bulb
Lintless Swabs 1 1/2" x 6" - 30/pk
Pyroflash 6/24 Controller
CITC 2" x 24" Air Cannon Confetti Launcher
Tubular Webbing
Kryolan Cold Foam Set
Ben Nye Fireworks Wheel
Kryolan Blood Capsules TF
Antari B-200 High Output Bubble Machine
Kryolan Rubber Mask Grease Palette - Pro
Musst PRO Brush Cleaner
Smoke Tube (Smoke Special Effects)
BT Disinfectant Spray Industrial Grade
CITC Foam Dome
Muslin Fabric - Natural (FR)
Kryolan Orange Stipple Sponge
Kryolan Lip Rouge Palette - Classic 2
Igeba Thermal Water Based Fog Generator
Durable Electrical Pouch
Oakum
Krylon Rust Tough Hamm-R Finishes Spray 



Reviews
There are no reviews yet.