FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Streamlight 51104 Xenon Bulb
Duracell Procell PC1604 Alkaline Battery
Rosco FlexBond Adhesive
Lockable Storage Container 60L
Pelican 1500 Medium Case
Krylon Rust Tough Hamm-R Finishes Spray
Pelican 1620 Large Case
Brasso Longer Lasting Shine Metal Polish
Laser Pointer On/Off Switch & Case
DSC Labs Billups VF/X Chart
CITC HazeMax Water Vapour Haze Machine
Ultra Materials Ultra Sculpt (Sculptable Stage Makeup)
2" Double Sided Masking Tape
Sculpey Polymeric Clay
Dynamic's Super Lid with Spout
Igeba Thermal Fog Generator (TF-35)
Ultratec EZ Kleen Preventative Maintenance Fluid
Rosco CrystalGel
Pyroflash 6/24 Controller 



Reviews
There are no reviews yet.