FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Custom Made Slime
Smoke Tube (Smoke Special Effects)
Kenwood FBI Earpiece Headset
A&B Smoke
Olfa Blades
Charger Holder
Duracell Procell PC1400 'C' Alkaline Battery
Kryolan Tear Stick
Pelican 1650 Large Case
Kryolan Menthol Tear Blower Refill
Z-7 Debonder Adhesive Remover
TT 3C Xenon Bulb - Streamlight
Duracell Procell PC1604 Alkaline Battery
Streamlight Fire Vulcan Vehicle Mount System
Webbing with HD Ratchet
Ultratec Radiance Touring System
Pelican 1620 Large Case
1″ x 15′ High Intensity Reflective Tape Fl Orange
Reusable Rubber Twist Ties (Gear Ties)
Duracell Procell PC1300 'D' Alkaline Battery
Rosco Flat Acrylic Glaze
Mole Richardson Maroon Enamel Spray
Mehron Matte Spirit Gum
Streamlight 51105 Xenon Bulb
Krylon High Heat Paint 



Reviews
There are no reviews yet.