FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Mehron Castor Sealer
Goof Off Pro Strength Adhesive Remover
Filmcraft Deluxe Script Pouch
Ben Nye One-For-All Lip Palette (STP-30)
Ben Nye Essential FX Palette (STP-41)
Kryolan Blood Capsules TF
Gorilla Clear Grip Glue
Kryolan Rubber Mask Grease Palette - Pro
Ben Nye Fireworks Wheel
Streamlight Bulb
Kryolan Bald Cap Mold Block (Read Head)
MegaPro Original Screwdriver
Tubular Webbing
Streamlight Fire Vulcan Vehicle Mount System
2" Double Sided Masking Tape
Pelican Desiccant Silica Gel
Pelican 1500 Medium Case
FKW CP81 Halogen Projection Lamp
Krylon Rust Tough Hamm-R Finishes Spray 



Reviews
There are no reviews yet.