FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Ultratec LSX MK II Low Smoke Converter
CITC Director Junior Fan
Steelie Bar Mount Component
Bull Wipes All Purpose Disinfectant
3M Super 77 Spray Adhesive (399g)
Kryolan Blood Capsules TF
Master Padlock
GypSnow
3M Hi-Strength 90 Spray Adhesive (500g)
Kryolan Menthol Tear Blower Refill
BBA Incandescent Photoflood Bulb
Dynamic's Super Lid with Spout
Mehron Castor Sealer
Z-7 Debonder Adhesive Remover
Krylon Dulling Spray 



Reviews
There are no reviews yet.