FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Rosco Fog Fluid (4L)
Cheesecloth 100% Cotton
Blasting Galvanometer
Reusable Rubber Twist Ties (Gear Ties)
GypSnow
Mehron Matte Spirit Gum
Ultratec Power Fog Industrial 9D - Fog Machine
Pelican 1620 Large Case
Dynamic's Super Lid with Spout
Ben Nye Fireworks Wheel
Variable-Angle Pod
Alumilite Mini Casting Kit
Sesamee SearchAlert TSA Lock
Z-7 Debonder Adhesive Remover
Kryolan Glatzan Bald Cap
Scatter Snow Flakes
2" Double Sided Masking Tape
Pelican 1500 Medium Case
Custom Made Slime
Tubular Webbing
Clamps for Hackles
Disposable Tapered Head Mascara Wands (25 Pack)
Kryolan Menthol Tear Blower Refill
Krylon High Heat Paint
3/4" Friction Tape
1" Foam Brush 




Reviews
There are no reviews yet.