FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Ben Nye Essential FX Palette (STP-41)
Krylon Rust Tough Hamm-R Finishes Spray
Disposable Tapered Head Mascara Wands (25 Pack)
CITC Director Fan
GE 33934 EKB Projector Light Bulb
Igeba Thermal Water Based Fog Generator
Pelican M11 Rechargeable Flashlight
Safety Tape Non-Skid Slip-Resistant Tread
Sculpey Polymeric Clay
Kryolan Lip Rouge Palette - Classic 2
Kryolan Glatzan Bald Cap
Kryolan Cold Foam Set
Tubular Webbing
Osram EHG Lamp
2" Back Pressure Caps
Pelican 1650 Large Case
Kryolan Rubber Mask Grease Palette - Pro
ShotMax Confetti Machine
Hurricane 5000 (110V) DMX
Coghlan's Emergency Blanket
Dynamic's Super Lid with Spout 



Reviews
There are no reviews yet.