FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Kryolan Rubber Mask Grease Palette - Pro
Pelican Desiccant Silica Gel
Igeba Thermal Water Based Fog Generator
Putora Sharpness Indicator Field Chart (7A9)
Pelican 1650 Large Case
Ben Nye Concealer Palette 12 Colours
Kryolan Blood Capsules TF
Kryolan Lip Rouge Palette - Classic 2
KN95 Disposable Mask
Laser Pointer On/Off Switch & Case
Kryolan Orange Stipple Sponge
Sculpey Polymeric Clay
Kryolan Glatzan Bald Cap
Kryolan Bald Cap Mold Block (Read Head)
Duracell Procell PC1604 Alkaline Battery
Krylon High Heat Paint
Disposable Tapered Head Mascara Wands (25 Pack)
Duracell Procell PC1400 'C' Alkaline Battery
Sheik Non-Lubricated Condoms - For Special Effects
Ultratec LSX MK II Low Smoke Converter
Streamlight 51105 Xenon Bulb
Rosco CrystalGel 




Reviews
There are no reviews yet.