FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
3M Hi-Strength 90 Spray Adhesive (500g)
Duracell Procell PC1400 'C' Alkaline Battery
Look Solutions Radio Remote XLR
Antari B-100X Bubble Machine
Certainty Surface Sanitizing Wipes
2" Double Sided Masking Tape
Mini Mag-Lite Bulb
Sculpey Polymeric Clay
Cheesecloth 100% Cotton
Clamps for Hackles
Tork Wipes Dispenser
Rosco Light Fog Fluid
Putora Sharpness Indicator Field Chart (7A9)
Tubular Webbing
Acid Yellow 73 Fluorescein
Rosco Flat Acrylic Glaze 



Reviews
There are no reviews yet.