FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Osram 64111 BA9s Halogen Bulb
Duracell Procell PC1400 'C' Alkaline Battery
Unique Haze Fluid
Ultratec EZ Kleen Preventative Maintenance Fluid
Mole Richardson Maroon Enamel Spray
Bee Gum (Smoke Effects)
Kryolan Rubber Mask Grease Palette - Pro
SnowBase Cellulose Snow
Kryolan Blood Capsules TF
Reusable Rubber Twist Ties (Gear Ties)
Osram EHJ 64655 HLX Halogen Bulb
Medicine Plastic Cups
Pelican 1620 Large Case
Insert Camera Slate
Cryo-Jet Hose 50'
Rosco Flat Acrylic Glaze 




Reviews
There are no reviews yet.