FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
QF18 Small Conceal Brush
Pyroflash 6/24 Controller
Z-7 Debonder Adhesive Remover
Blasting Galvanometer
QE20 Precision Shadow Brush
Sphere Shaped Head Mascara Wands
QF22 Fan Brush Synthetic
QL23 Lip Brush
CITC Director Fan
Sculpey Polymeric Clay
Ultratec Party Fog Fluid
QE12 Angle Brush
Duracell Procell PC1400 'C' Alkaline Battery
Duracell Procell PC1604 Alkaline Battery
Ultra Materials Ultra Sculpt (Sculptable Stage Makeup)
Master Padlock
Mack's Earplugs
Cardellini Laser Pointer Holder
Cheesecloth 100% Cotton
Kryolan Supracolor Cream Palette
Mole Richardson Maroon Enamel Spray 



Reviews
There are no reviews yet.