FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Pelican 1620 Large Case
Rosco Flat Acrylic Glaze
Cheesecloth 100% Cotton
Kryolan Rubber Mask Grease Palette - Pro
Le Maitre G300 Smoke & Haze Machine
2" Double Sided Masking Tape
Kryolan Blood Capsules TF
QF18 Small Conceal Brush
Kryolan Lip Rouge Palette - Classic 2
Z-7 Debonder Adhesive Remover
Ultratec Bubble Fluid Supreme (Premium Dry)
QL23 Lip Brush
Plain Chipboard Sheets
MegaPro Stainless Steel Screwdriver
Smoke Tube (Smoke Special Effects)
Kryolan Cold Foam Set
Krylon Rust Tough Hamm-R Finishes Spray 


Reviews
There are no reviews yet.