FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
2" Double Sided Masking Tape
Kryolan Bald Cap Mold Block (Read Head)
Mehron Matte Spirit Gum
Rosco Light Fog Fluid
Putora Sharpness Indicator Field Chart (7A9)
Cinema Secrets Woochie Bald Cap
Z-7 Debonder Adhesive Remover
Mole Richardson Maroon Enamel Spray
ShotMax Confetti Machine
Kryolan Rubber Mask Grease Palette - Pro
33" Safety Cable
Sesamee SearchAlert TSA Lock
Snow Sheet
Camp Heat
Rosco Lens Tissue
Sheik Non-Lubricated Condoms - For Special Effects
Handle Boot Bag (Clear) - 20" x 20" x 5" (10 bags/roll)
Tubular Webbing
Vermiculite
Oakum
Flame Gel
Rosco FlexBond Adhesive
Draw Cord Boot Bags (Clear) - 20" x 24" x 4" (10 bags/roll)
Krylon Rust Tough Hamm-R Finishes Spray 




Reviews
There are no reviews yet.