FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Smoke Tube (Smoke Special Effects)
Hurricane 5000 (110V) DMX
Mehron Matte Spirit Gum
Camp Heat
Ultratec Show Fogger Pro
Ben Nye Concealer Palette 12 Colours
Rosco Light Fog Fluid
Kryolan Rubber Mask Grease Palette - Pro
Sheik Non-Lubricated Condoms - For Special Effects
QE12 Angle Brush
Golf Tees
Pelican Desiccant Silica Gel
Oakum
Z-7 Debonder Adhesive Remover
Kryolan Menthol Tear Blower Refill
Ben Nye Large Texture Brush
Ultratec Bubble Master Fluid 4L
Kryolan Cold Foam Set
HP Stinger Bulb
Poly 40 Powder Snow
Snow Wool Batt
Master Padlock
Rosco CrystalGel 




Reviews
There are no reviews yet.