DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
Sculpey Polymeric Clay
Ben Nye Concealer Palette 12 Colours
Kryolan Bald Cap Mold Block (Read Head)
Steelie Orbiter Magnetic Socket + Metal Plate
Bikini Bite - Roll On Adhesive
Radio Chest Harness
Mehron Castor Sealer
Kryolan Supracolor Cream Palette
Kryolan Cold Foam Set
Ultratec LSX MK II Low Smoke Converter
Custom Made Slime
CITC 2" x 24" Air Cannon Confetti Launcher
Vermiculite
Medicine Plastic Cups
Poly 40 Powder Snow
Laser Pointer On/Off Switch & Case
Rosco Chroma Floor
Cryo-Jet Hose 50'
CITC HazeMax Water Vapour Haze Machine
Tubular Webbing
Kryolan Blood Capsules TF
3 Ply Disposable Face Mask
CITC Director Junior Fan
Macbeth Colour Checker Chart
Kryolan Lip Rouge Palette - Classic 2
Kryolan Rubber Mask Grease Palette - Pro
Breakaway Ashtray
Duracell Procell PC1400 'C' Alkaline Battery
Cheesecloth 100% Cotton
Igeba Thermal Fog Generator (TF-35)
TT 3C Xenon Bulb - Streamlight
3M Hi-Strength 90 Spray Adhesive (500g) 







Reviews
There are no reviews yet.